Molotilo LLC
Decorate your life. Event design & styling.
Call: +1-202-865-6611
Customer Care representatives are available daily
from 9 a.m. to 5 p.m. PT

Heavy duty steel bat house mounting brackets

Home » Backyard Birds & Animals » Bat Boxes »

Steel Pole Single Unit Mounting Bracket

All brackets for a pole mounting application are fabricated with a 3 x 3 inch square 13/16 inch thick wall receiver tube welded to the 2 inch steel support arm.The tubing has two 1/4 inch bolt holes taped into the sides to receive a 1/4 inch bolt with a jam nut on the bolt to assure proper sacrament to the mounting pole.

bat house pole

 

This unit was designed so it can be used with 1-1/2 inch (1-13/16» OD), or 2 inch (2-3/8» OD) black pipe and can be used to mount any of our Premier Series Bat Houses

a bat in the house

 

This unit will support any one of our 5 different model bat houses that we sell.

We recommend using a 2 inch pipe when mounting a 3, 4 or 5 chamber unit.

Steel Pole Mounting Bracket for a Back-to-Back installation of Bat Houses

Back to Back Installation

This unit is constructed in the same manner as the single house mounting bracket with the exception to an additional arm for mounting two bat houses back to back.

gainesville bat house

 

We recommend only using a 2 inch pole for this application and no more than two, 3 chamber units.

  • Wood Post or Pole Mounting Bracket for a single unit
  • Square Post Application
  • Round Pole Application
  • This unit is constructed with 1/8 inch x 2 inch mounting plate and 1/8 inch x 1 inch mounting arms.

    This unit will support any one of our 5 different model bat houses that we sell.

    You can use this mounting unit to attach your Bat House to a square or rectangular wood post or a wood pole up to 19 1/2 inches wide.

    We do not recommend attachment to trees, dead or alive.

  • Wall Mounting Bracket
  • Wall Mounted Bat House Bracket
  • The wall mounting unit was designed and constructed for the application of direct attachment of a bat house to a wall surface, be it on a residence or commercial structure.

    It is contrasted from 1/8 inch x 2 inch steel and welded solid at all points. This unit will hold the bat house away from the wall 5 inches and helps to decrease or eliminate the bat guano droppings from hitting the wall area.

    This unit will support any one of our 5 different model bat houses that we sell.

    All hardware for mounting the bat house to the brackets is included.

    (Hardware to mount the bracket to the structure surface is not included because there are so many different attachment possibilities, depending on the structure construction.)

    Easy-Up “Swivel Pole Mounting Bracket”

    The Easy-Up swivel pole bracket was designed so you can raise and lower your bat house for yearly inspection, cleaning, and maintenance with ease.

    The main bracket structure is made from 3″x3″ x 3/16″ tubular steel and machined in such a manner that it will fit over your existing 2 3/8″ O.D. steel pipe.

    The Easy-Up bracket has a flat black Powder Coat finish.

    You can use the Easy-Up bracket over your existing round steel pipe no matter what size pipe you have. If your steel pole is a 1 5/8″ – 1 7/8″ or a 2 3/8″ O.D. pipe, this will work for you.

    We do not recommend installing (2) bat houses on a pipe size smaller then the 2 3/8″ O.D.

    Installation of double 4 chamber and 5 chamber Bat Houses should not be attempted on a pipe smaller then 3″ or 4″.

    (for larger view click images)











    © 2016 | All Rights Reserved | www.molotilo.com