Molotilo LLC
Decorate your life. Event design & styling.
Call: +1-202-865-6611
Customer Care representatives are available daily
from 9 a.m. to 5 p.m. PT

How to repair broken birdbath bowls

Home » Backyard Birds & Animals » Bird bath »

Step 3 – Mix Epoxy

Read the package directions on your concrete epoxy container for any specific details pertinent to the brand, especially curing time and temperature. The epoxy will include 2 components: the resin and hardener. Mix these together in equal amounts on the cardboard, using the mixing stick. Stir gently and try not to create air bubbles in the epoxy as you mix it up.

bird bath top

 

Step 4 – Apply Epoxy

Again using your mixing stick, apply the epoxy generously to the edges of the break. Be sure to follow package directions regarding working time and how quickly the epoxy sets up, and work within those guidelines. Match the broken pieces of your birdbath bowl together, and hold them in place for several minutes until the epoxy begins to set.

bird bath tops

 

Step 5 – Clamp

Depending on the nature of the break in your birdbath bowl, it may be necessary to use a large clamp to stabilize the bowl while curing. If the bowl was broken in half, a clamp is a good idea. Place the bowl on a flat surface, and fasten the clamp across the bowl in a perpendicular direction across the area of the bond.

bird bath top replacement

 

Step 6 – Clean Up

Use your clean, dry rags to wipe any excess epoxy away from the birdbath bowl surface.

Step 7 – Cure

The cement epoxy directions will recommend a curing time, most likely 24 hours or more. Allow your birdbath bowl repair to cure completely before moving it back outside into the elements.

table top bird bath

 











© 2016 | All Rights Reserved | www.molotilo.com