Molotilo LLC
Decorate your life. Event design & styling.
Call: +1-202-865-6611
Customer Care representatives are available daily
from 9 a.m. to 5 p.m. PT

All about dovetail joints – fine woodworking article

Home » Easy projects » Wood working »

Considered one of the strongest and certainly the most beautiful of joints, the dovetail exacts a stiff price in terms of skill for the strength and good looks it provides.

dovetail woodworking

 

The Basics:

º Anatomy of the joint: Pins and tails make a locking joint in a number of variations.

º By hand or machine: The best are cut by hand.

º Alternative dovetails: Sliding dovetails and dovetail keys are close cousins of the traditional joint.

woodworking skills

 

Dovetails areВ probably the strongest method for joining two pieces of wood, surface to surface, with the grain running in the same direction. The dovetail joint provides considerable mechanical strength because when the joint is assembled, it can’t be twisted or racked. And the shape of the dovetail makes it impossible to take apart in one direction and difficult in the other. This joint stays together — even without glue!

woodworking pictures

 

Anatomy of the joint

The dovetail joint is made up of two parts. The tails are the flared, triangular shapes, cut through the thickness of one board. The pins are the more slender projections, cut along the grain of the other board. There is an ongoing argument/discussion as to which part should be cut first. Generally, European trained woodworkers believe the pins should be done first.

There are basically three types: through, or full, dovetails are used to join carcases, blanket chests, and small boxes. These are regarded as the strongest and most beautiful.В Half-blind dovetailsВ are commonly used to join drawer sides to drawer fronts and occasionallyВ are employed on the construction of carcases. Full-blind or secret dovetails are rarely used because when assembled, the dovetails — and all the work — are completely hidden.

Half-blind dovetails are the most common joints for attachingВ drawer fronts to drawer sides.

By hand or machine

Although historically, dovetails were strictly employed for practical reasons, today, they appear on furniture primarily for decorative and aesthetic reasons and have come to symbolize fine craftsmanship.

Today, there are jigs that enable a woodworker to cut dovetails mechanically, but the end result appears static and too uniform. The best-looking dovetails have always beenВ cut by hand.

Christian Becksvoort has cut thousands of dovetail joints, learn how he streamlines the process in his article,В My Favorite Dovetail Tricks.

Cutting dovetailsВ by hand is considered a real benchmark inВ the development and trainingВ of a furniture maker and is a skill every novice woodworker aspires to master.

Cutting good dovetails begins with a goodВ layout. Deciding the angle, number, size, and spacing of the dovetails is critical to success. Generally, the widest portion of the pin should be equal to 1/2 the thickness of the material. The angle of the dovetail is generally between 15В° and 20В°.

The spacing (space between the pins) is usually twice the width of the pins. However, always keep in mind the intended purpose of the project. Utilitarian projects can have thicker, fewer pins. It would be a waste to cut fine, delicate dovetails on a tool box that will be subjected to rough and careless handling.

If you want to skip the hand work, dovetails can also be cut usingВ machinesВ such as theВ tablesaw, bandsaw, orВ router.

Use a router and aВ dovetail jigВ to dovetails with speed and ease.

Sliding dovetail and keys

Sliding dovetailsВ employ the same concept as the traditional joint, butВ more resemble the tongue-and-groove joint. A tail-shaped tongue slides into a pin-shaped groove, andВ won’t pull apart when glue is applied. This is a good choice for joining partitions to a case piece, as it prevents the sides from pulling away from the partition.











© 2016 | All Rights Reserved | www.molotilo.com